2.0KW Cooling Capacity Outdoor Telecom Cabinet Galvanized Steel
With Heat Insulation
1. Cabinet Instructions
This series cabinet is 2100mm High and 900mm Wide and 900mm Deep.
For those who need more than just standard cabinet, this series can
also offer a truly the security of customized solution with lots of
available options, providing a climate-controlled environment for
any electronic equipment, electrical load panels and cable entry
solutions. It provides a secure,climate controlled environment for
any electronic equipment.
2. Cabinet Parameters
|1||Outdoor Telecom Cabinet||1||Set|
(1) External Size H×W×D 2100×900×900mm
(2) One compartment: equipment compartment
(3)With one front door, and anti-theft three point lock for outdoor
cabinet (support padlock)
(4) Material: Galvanized steel ; 1.5mm thick outer plate, 0.8mm
thick inner plate with 20mm PEF heat insulation between two walls.
Cooling capacity: 2.0KW,
Power supply: AC220V, 50HZ;
|3||Auxiliary Direct Ventilation Fans||2||PC||12038 DC48V|
|4||Door Sensor||2||PC||One for controlling LED lamp, the other for open door alarm|
|6||Embedded Telecom Power System (Rectifier)||1||Set||Optional|
|7||Temperature control switch||1||PC||35°C temperature control switch|
3. Cabinet Description
The cabinet is made of galvanized steel, with double walls,
thickness of outer plate: 1.5mm, thickness of inner plate: 0.8mm.
There are heat insulation between inner wall and outer wall. The
insulation material is 20mm PEF. The cabinet is assembled type.
The cabinet is equipment cabinet, including 19” equipment
installation rack, with air conditioner on cabinet door.
The cabinet door uses embedded structure. The door opening angle is
larger than 110°and the door limit device can limit the opening
angle. Each cabinet door include open door sensor, working together
with the environment monitoring unit.
The lock is theftproof three point lock, supporting padlock
4.1 The cabinet is dustproof, sunproof and rainproof, which is used
in outdoor environment.
4.2 The cabinet cooling uses air conditioner and fans.
4.3 Including -48VDC illumination lamp.
4.4 The layout of the cabinet is reasonable, which will facilitate
cable access, fixing and grounding. At the bottom of the cabinet,
there are entrance holes individually for power cable, signal cable
and optical cable.
4.5 All the cables, sealing and heat insulation used in the cabinet
are made from flame retardant materials.
4.6 The cabinet includes 19” standard installation rack.
5. Cooling System
AC220V air conditioner installed on the front door.
DC48V fans are intalled on the top cover
6. Cabinet Production